Table of Contents
Review Articles
| Design and Analysis of Various Solar Cell Technologies for Improvements in Efficiencies |
|
| Sharma, Divya ; Mehra, Rajesh ; Raj, Balwinder | 557-567 |
Articles
Comprehensive Exordium of Monte Carlo Simulation Technique: An Alternative Approach for Measurement Uncertainty Evaluation |
|
| Moona, Girija ; Kumar, Harish | 568-572 |
| Characterization and Testing of KF/CaO Heterogeneous Catalyst for Biodiesel Production |
|
| Sahu, Gajanan ; Sahoo, Narendra Kumar; Gupta, Pavan Kumar; Chauhan, Vishal ; Saw, Shiva Kumar | 573-580 |
Effect of Thermal Strain, Induced by Cryogenic Cooling, on a High Homogeneity Superconducting Magnet for MRI Applications |
|
| Thekkethil, Sankar Ram ; Rastogi, Vikas ; Kar, Soumen | 581-585 |
| Hydrothermal Synthesis of Rare Earth Co-Doped Cerium Oxide: Influence on Phase Composition, Characterization, and Photocatalytic Activity |
|
| Özlü Torun, Handan ; Kırkgeçit, Rabia | 586-593 |
| Surface Tension of Polyurethane Solution and Thermodynamic Model |
|
| Zhang, Jinjie ; Qi, Yingping ; Lu, Pei ; Shen, Yongfeng ; Li, Hua | 594-597 |
Mechanical and Microstructural Evolution of Friction stir welded joint of AA2014 alloys |
|
| Singh, Bharat ; Sankhla, Arvind ; Saxena, Kuldeep Kr; Singhal, Piyush | 598-604 |
| Assessment of Intermittent Leather based on Image Score Pattern |
|
| Vasagam, Nithiyanantha ; Sornam, M | 605-614 |
Seismic Response of Y-Shape Multi-Storey Building with Optimum Location of Shear Walls |
|
| Banerjee, Rajiv ; Srivastava, Jyoti Bhushan; Gupta, Nakul | 615-621 |
| Simulation & Performance Analysis of Stand-by Distributed Generation System |
|
| Agrawal, Sanjay ; Chaurasia, G S; Mishra, Ambarisha | 622-629 |
| Sequential Enzymatic and Oxidative Pre-Treatment Effect on Natural Lignocellulosic Fibres |
|
| Kumar, Niranjan ; Chattopadhyay, S N; Khan, Amalesh | 630-636 |
| Structure Determination of Al2CuMg Precipitates in AlCu15Mg5 Alloys by High-Resolution Electron Microscopy |
|
| Zlatičanin, Biljana | 637-641 |
| Synthesis and Characterization of Zinc Oxide Nanoparticles from Solanum Nigrum and Eclipta prostrata for Effective Removal of Fluoride |
|
| Manikannan, Kavisri ; Abraham, Marykutty ; Moovendhan, Meivelu | 642-648 |
| Determination of Limit Drawing Ratio of SS 304 Steel using Sheet Hydroforming Process with Female Die |
|
| Dilmeç, Murat ; Bülüç, Vehbi | 649-657 |
Design and Analysis of Foot Operated Water Spout |
|
| Rakesh, Kumar ; Kumar, Aravind ; Bansal, Rajeev | 658-667 |
| Surface Roughness Prediction in Grinding Ti using ANFIS Hybrid Algorithm |
|
| Stephen, Deborah Serenade; Sethuramalingam, Prabhu | 668-677 |
| Production and Characterisation of Biodiesel with the mixture of Ambadi oil and Waste Cooking Oil |
|
| Kukana, Rajendra ; Jakhar, Om Prakash | 678-685 |
Influence of process parameters on mechanical and microstructural property of dissimilar friction stir welded joints of armor aluminium alloys AA7039 and AA5083 |
|
| Ghangas, Gyander ; Singhal, Sandeep | 686-695 |
Indian Journal of Engineering and Materials Sciences (IJEMS)