Table of Contents
| Contents | |
| 7-8 |
Paper
Effect of linear density of feed yarn filaments and air-jet texturing process variables on compressional properties of fabrics |
|
| Baldua, R K; Rengasamy, R S; Kothari, V K | 9-16 |
Finite element analysis of mechanical properties of 2.5D angle-interlock woven composites: Part 1— Full-cell model and its validation
|
|
| Song, Jian ; Wen, Weidong ; Cui, Haitao | 17-24 |
Comfort properties and dyeing behaviour of cotton/milkweed blended rotor yarn fabrics |
|
| Karthik, T ; Murugan, R ; Sakthivel, J C | 25-30 |
Effects of different production processing stages on mechanical and surface characteristics of polylactic acid and PET fibre fabrics |
|
| Hasani, Hossein ; Avinc, Ozan ; Khoddami, Akbar | 31-37 |
Manufacturing and morphology of poly(-caprolactone) based microfibre webs for biomedical applications through airbrush technique |
|
| Bedeloğlu, Ayşe Celik; Bhullar, Sukhwinder K; Borazan, Ismail ; Cin, Zeynep Işlek; Demir, Ali | 38-42 |
Modelling of surface roughness based on geometrical parameters of woven fabrics |
|
| Ezazshahabi, Nazanin ; Tehran, Mohammad Amani; Latifi, Masoud ; Madanipour, Khosro | 43-50 |
Regenerated cellulose/multiwalled carbon nanotube composite films with enhanced mechanical properties prepared in NaOH/urea aqueous solution |
|
| Li, Qian ; Li, Qing | 51-56 |
Comfort limit and heat protection properties of single layer cotton/nylon-Kermel blended fabrics |
|
| Kakvan, Ali ; Najar, Saeed Shaikhzadeh; Psikuta, Agnes ; Sharifnejad, Farshid | 57-63 |
Mechanical, thermal and dynamic mechanical analysis of jute fibre reinforced epoxy composite |
|
| Gupta, M K; Srivastava, R K | 64-71 |
A new technique of producing sliver of Estabragh fibres |
|
| Merati, Ali Akbar; Moazeni, Najmeh | 72-76 |
Numerical simulation of three-dimensional flow field in three-line rollers and four-line rollers compact spinning systems using finite element method |
|
| Liu, Xiaoyan ; Liu, Xinjin | 77-82 |
Finite element modeling of electrospun nanofibre mesh using microstructure architecture analysis |
|
| Gorji, M ; Jeddi, Ali A.A.; Gharehaghaji, A. A. ; Haghpanahi, M. | 83-88 |
Effect of alkaline treatment on mechanical properties of voile fabric reinforced epoxy composites |
|
| Koyuncu, Menderes | 89-93 |
Effect of moisture and water on thermal protective performance of multilayered fabric assemblies for firefighters |
|
| Chakraborty, Supriyo ; Kothari, V K | 94-99 |
Toughened cyanoethyl starch by blending with poly(methyl acrylate-co-acrylic acid-co-acrylonitrile) latex for warp sizing |
|
| Zhu, Zhifeng ; Chen, Xiaoyu ; Wang, Miao ; Lin, Jack | 100-106 |
Short Communication
Effect of lateral crushing on tensile property of bamboo, modal and tencel fibres |
|
| Murugan, R ; Karthik, T ; Dasardan, B S ; Subramanian, V ; Shanmugavadivu, K | 107-110 |
| Effect of chemical treatments on physico-chemical properties of fibres from banana fruit and bunch stems |
|
| YILMAZ, Nazire Deniz; Sulak, Mine ; Yilmaz, Kenan ; Khan, G M Arifuzzaman | 111-117 |
Indian Journal of Fibre & Textile Research (IJFTR)